Making Cosmetics Shopping Bag
Items:
(0)
Total:
$0
Welcome, Guest | Login

Face Mask Formulas

 
         
 

Rejuvenating & Detox Mineral Mask

 
  Phase A Weight % For 100g / 3.6oz  
  Distilled Water (diluent) 75.5% 75.5g / 2.7oz  
  ICE Alginate (thickener) 6.0% 6.0g / 0.2oz  
  Phase B      
  Glycerin (humectant) 4.0% 4.0g / 0.14oz  
  Red Kaolin Clay (mask clay) 4.0% 4.0g / 0.14oz  
  Colloidal Oatmeal (active ingredient) 2.0% 2.0g / 0.07oz  
  Vitamin E Tocopherol (antioxidant) 0.5% 0.5g / 0.02oz  
  Baobab Oil (emollient) 2.0% 2.0g / 0.07oz  
  Licorice Extract (botanical) 2.0% 2.0g / 0.07oz  
  Laureth-3 (emulsifier) 1.5% 1.5g / 0.05oz  
  Phase C      
  Edelweiss Extract (botanical) 0.5% 0.5g / 0.02oz  
  Green Tea Extract (botanical) 0.5% 0.5g / 0.02oz  
  Provitamin B5 (active ingredient) 0.5% 0.5g / 0.02oz  
  Citrus Combo (antimicrobial agent) 1.0% 1.0g / 0.03oz  
         
 
  Method: No heating required. Combine phase A ingredients (1-2), mix well until the ice alginate is dissolved (use a stick blender or homogenizer for best results). Add phase B ingredients in order, mix well after each ingredient.  Add phase C to phase A/B and mix again with a stick blender or homogenizer for a smooth consistency. pH ~5.5-6.

Properties: Contains Antioxidants of edelweiss & green tea to fight free radicals. Supports the skin’s natural defense mechanism and detoxifies effectively. Highly nourishing due to its mineral content. Improves the appearance of enlarged skin pores. Apply a semi-thick layer to clean, damp skin, let absorb for 5-15 min before rinsing off using warm water.

 
         
 
         
 

Vitamin C & Honey Peel Mask

 
  Phase A Weight % For 100g / 3.6oz  
  Vitamin C Cream Base (base) 90.5% 90.5g / 3.2oz  
  Bacillus Ferment Extract (peeling enzymes) 4.0% 4.0g / 0.14oz  
  Honey (humectant) 1.5% 1.5g / 0.05oz  
  Jojoba Castor Beads (exfoliant) 4.0% 4.0g / 0.14oz  
  Phase B      
  Fragrance (optional) 0.2% 0.2g / 3-5 drops  
         
 
  Method: No heating required. Combine phase A ingredients (1-4) and stir well until uniform. Add phase B (optional) and stir well.

Properties: Antioxidant, exfoliating and moisturizing mask. The jojoba/castor beads will help to do a mild and quick exfoliation, while the enzymes work deeper, especially with regular use. The amount of mechanical exfoliants can be reduced or increased to you liking, or they can also be left out if the mechanical peel action is not desired. Apply to clean, damp skin. Massage gently for a short time. Then let sit on skin for 5-15 min before rinsing off using warm water.

 
         
 
         
 

Sulphur Clay Mask for Oily/Combination Skin

 
  Phase A Weight % For 100g / 3.6oz  
  Distilled Water (diluent) 52.0% 52.0g / 1.9oz  
  Glycerin (humectant) 3.0% 3.0g / 0.11oz  
  Carbomer 940 (thickener) 0.2% 0.2g / 0.007oz  
  Phase B      
  Kaolin (mask clay) 30.0 % 30.0g / 1.1oz  
  Sulphur Mud (silt) 5.0 % 5.0g / 0.18oz  
  Willow Bark Extract (botanical) 2.0% 2.0g / 0.07oz  
  Bacillus Ferment Extract (peeling enzymes) 2.0% 2.0g / 0.07oz  
  Witch Hazel Extract (botanical) 2.0% 2.0g / 0.07oz  
  Chamomile Extract (botanical) 2.0% 2.0g / 0.07oz  
  Phase C      
  Laureth-3 (emulsifier) 1.0% 1.0g / 0.04oz  
  Orange-Lemongrass Blend (antimicrobial) 0.8% 0.8g / 0.03oz  
         
 
  Method: Combine phase A ingredients (1-3), mix well until the carbomer is dissolved (use stick blender or homogenizer for best results). Add phase B ingredients in order, stir well after each ingredient. Add phase C to phase A/B and stir well. Mix again with a stick blender or homogenizer to get a smooth, nice consistency. Because of its thick consistency package into tubes or jars. If a fragrance is used, omit Orange-Lemongrass Blend and add CitrusCombo instead. Add fragrance at 0.2% concentration. CitrusCombo will lower the pH, so after a good final mix with stick blender or homogenizer check the consistency, if there is separation measure the pH and make adjustments. Ideal ph 5-6.

Properties: Mask that works for combination & oily skin. Helps target imperfections and removes impurities and oil without overdrawing. Willow bark and enzymes will help soften and act as mild exfoliant. Apply a semi-thick layer to clean, damp skin and let dry. This can take up to 15min. depending how much was applied. Then rinse off using warm water.

 
         
 
         
 

Brightening Facial Mask with Enzymes

 
  Phase A Weight % For 100g / 3.6oz  
  Distilled Water (diluent) 72.5.0% 72.5g / 2.6oz  
  ICE Sunflower (thickener) 6.0% 6.0g / 0.2oz  
  Phase B      
  Glycerin (humectant) 4.0% 4.0g / 0.14oz  
  Cherry Kernel Oil (emollient) 4.0% 4.0g / 0.14oz  
  Bacillus Ferment Extract (peeling enzymes) 4.0% 4.0g / 0.14oz  
  Aloe Vera 10x Concentrate (botanical) 1.0% 1.0g / 0.04oz  
  Licorice Extract (botanical) 5.0% 5.0g / 0.2oz  
  Mulberry Root Extract (botanical) 2.0% 2.0g / 0.07oz  
  Phase C      
  Provitamin B5 (active ingredient) 0.5% 0.5g / 0.02oz  
  Caprylyl Glycol EHG (antimicrobial) 1.0% 1.0g / 0.04oz  
  Citrus Combo (antimicrobial) 1.2% 1.0g / 0.04oz  
         
 
  Method: Combine phase A ingredients (1-2), mix well (using a stick blender or homogenizer for best results) until the ice sunflower is dissolved. Add phase B ingredients in order, stir well after each ingredient. Use a stick blender or homogenizer to get a smooth consistency. Add phase C to phase A/B and stir again well. pH 4.5-5.5.

Properties: Creamy, moisturizing mask ideal for all skin types. Enzymes and botanicals help soften and exfoliate the skin especially with regular use and applied for several minutes. Apply a semi-thick layer to clean, damp skin. Let absorb on skin for 5-15 min before rinsing off using warm water. Can easily be applied with a synthetic brush.

 
         
 
         
 

More Face Mask Formulas

     
  Skin Tightening Face Mask      
  Jojoba Face Mask with Kaolin (o/w)